Picture Hanging System

Follow us on Pinterest      Cart

 Search

The Walker Display picture hanging system starts at the top--with MOLDING.

Molding can be mounted at any height on the wall.

At about one inch below Ceiling Height—typically at 7'-6 or higher; above your floor—is great for hanging any size of artwork.

 

 

 

 

 

 

 

 

 

 

 

molding

Above diagram shows side views of two possible positions for molding that is installed on wall with mounting snaps. A screw (not supplied) holds the snap on the wall. The molding then goes on to the snaps.

Please visit your local hardware store for proper screw size. We recommend using a #8 or #10 flathead screw.  It is recommended that screws go into studs for a secure installation.  

Your picture hanging system is incomplete without the "molding", "sleeves", "rod or cable", and "hooks or holders".

 

 

Download our Catalog Here!

Download our Worksheet Here!

Picture Hanging System

Molding

"Aluminum Molding" and "Wood Molding" are for installation on the wall, either at ceiling height or at eye level.

"Aluminum Molding" accepts "Lock-On Rod Sleeves""Dual-Rod Sleeves", "Long Hooks", and  "Molding Hooks".

"Wood Molding"accepts “"Ogee Rod-Sleeves" and "Molding Hooks".

 

alum_molding.jpg
Aluminum Molding

Designed for a contemporary look. Three stock powdercoat colors available.  Plus Unfinished Aluminum that can be installed as is,  for the popular "industrial look" , or you can paint it to complement your surroundings.  

 

 

Available in Eight Foot lengths only. You can cut it on-site with a hacksaw, as needed.

Starting at $21.95.

Six "Standard" mounting snaps and one nylon joiner included.  Order "HD" Brass Snaps  if mounting to concrete, brick, plaster, or curved walls   etc.

Screws and anchors not included.

MADE IN THE USA

 


Wood Molding

Designed for a traditional look.

Screws and anchors not included 

Available in Eight Foot lengths only.

Each at $21.95.

MADE IN THE USA


Ceiling Mounting Kit

Designed for mounting Aluminum Molding  to the ceiling.

Per kit at $18.95

MADE IN THE USA


access_hdmountingsnaps.jpg
Mounting Snaps

Designed for mounting  Aluminum Molding .

Starting at $1.50 per set of six

"Standard" mounting snaps included in the price of Aluminum Molding. "HD" snaps required if mounting to concrete, brick, plaster, etc.

Screws not included.

MADE IN THE USA


access_endcaps.gif
End Caps

The End Cap set is designed to add a finished touch to the  Aluminum Molding.

The price is $1.00 per pair of End Caps.  Please note End Caps are available as TWO END CAPS per Package.

MADE IN THE USA


how it works
How it Works

products
Products

gallery
Gallery

frequently asked questions
F.A.Q.

contact
Contact Us